CPU-Z Readme file ------------------ Version 2.06 June 2023 Contact : cpuz@cpuid.com Web page: https://www.cpuid.com/softwares/cpu-z.html Validation page : https://valid.x86.fr/ Hall of Fame : https://valid.x86.fr/records.php CPUID SDK : http://www.cpuid-pro.com/products-services.php Configuration file (cpuz.ini) ------------------------------ The configuration file must be named cpuz.ini and be present at the same directory level as cpuz.exe. It contains the following : [CPU-Z] VERSION=x.x.x.x TextFontName= TextFontSize=14 TextFontColor=000080 LabelFontName= LabelFontSize=14 ACPI=1 PCI=1 MaxPCIBus=256 DMI=1 Sensor=1 SMBus=1 Display=1 UseDisplayAPI=1 BusClock=1 Chipset=1 SPD=1 XOC=0 CheckUpdates=1 - TextFontName : Font used for the information boxes. - TextFontSize : Size of the font used for the information boxes. - TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB - LabelFontName : Font used for the label boxes. - LabelFontSize : Size of the font used for the label boxes. - Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable. - PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable. - MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256. - DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable. - SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable. - Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable. - UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information. - BusClock : Set to 1, uses the bus clock as primary clock source. Set to 0 to use an alternate method. - Chipset : set to OFF (or 0) disables the memory controller and southbridge information. 1 to enable. - SPD : set to 0 to disable SPD reading. 1 to enable. - XOC : eXtreme Overclock Mode : runs CPU-Z with as little system load as possible. Your system won't be fully validated before it is manually checked. Requires to restart CPU-Z. - CheckUpdates : set to 0 to disable the new version checker at startup. 1 to enable. Parameters ---------- -txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt) in the same directory as the exe file. -html=filename : Same as "-txt" except it generates the html report. -core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one). -bench : runs CPU-Z without interface, runs the benchmark, and saves the result in a TXT file named like the machine. Keys ---- F5 : save the current tab in a bmp file F6 : save the current tab in the clipboard F7 : save cvf file in the current directory Cache Latency Tool ------------------ The cache latency tool can be downloaded at that address : http://download.cpuid.com/misc/latency.zip History ------- -------------------------------------------------------------------------------------------------- 2.06.1 - June 2023 - AMD Ryzen Z1 and Z1 Extreme (2.06.1). - AMD Ryzen 9 7940H & HS, Ryzen 7 7840HS (2.06.1). - Fixed AMD EPYC Milan reported as Genoa (2.06.1). - Intel Core i9 13980HX, 13900HX, 13900HK (2.06.1). - Intel Core i7 13700H, 13650HX (2.06.1). - Intel Core i5 13500HX, 13420H (2.06.1). - Intel N97, N95 and N50 (ADL-N, 6W to 15W). - AMD Dragon Range Ryzen 9 7945HX (16c/55-75W), 7845HX (12c/45-75W), Ryzen 7 7745HX (8c/45-75W), 7645HX (6c/45-75W). - Zhaoxin C-1080 IGP (KX-6000G). - Zhaoxin KH-40000 YongFeng (12/16/32c). - NVIDIA RTX 4070 (AD104-250). - NVIDIA RTX 4060 Ti (AD106-350). - AMD Radeon RX 7600 (Navi 33 XL). -------------------------------------------------------------------------------------------------- 2.05.1 - March 2023 - Fix RTX 4090/4080/4070 detection bug (2.05.1). - Fix DMI crash bug (2.05.1). - Intel Xeon Sapphire Rapids platform. - Preliminary support for AMD Storm Peak platform. - Zhaoxin KX-6000G/4 CPU. -------------------------------------------------------------------------------------------------- 2.04 - January 2023 - Intel N100 and N200 (ADL-N). - intel Core i3 N300 and N305 (ADL-N). - Intel Core i5 13450HX, 13500HX, Core i7 13650HX, 13700HX (55W). - Intel Core i9 13900KS. - AMD Ryzen 9 7950X3D, 7900X3D, Ryzen 7 7800X3D. - AMD Ryzen 9 7900, Ryzen 7 7700, Ryzen 5 7600 (RPL, 65W). - AMD Athlon Gold 7220U, Ryzen 3 7320U, Ryzen 5 7520U (MDN-A0, 15W). - AMD Radeon RX 7900XT/XTX. - NVIDIA RTX 4080 16GB (AD103). - NVIDIA RTX 4070 Ti (AD104). -------------------------------------------------------------------------------------------------- 2.03.1 - November 2022 - Intel Core i9 13900HK, Core i7 13700H/HX, 13650HX, 13620H, Core i5 13500H/HX, 13450HX, 13420H (2.03.1). - Intel Celeron 7305 (2.03.1). - Intel Core i9-13900/K/F/KF, Core i7-13700/K/F/KF, Core i5-13600/K/F/KF, Core i5-13500, Core i5-13400 and Core i3-13100. - Intel ARC A770, A750, A580 (ACM-G10) and A380 (ACM-G11) GPUs. - Support for multipliers > 64x on AMD Ryzen 7000. - Preliminary support for NVIDIA RTX 4000 GPUs. -------------------------------------------------------------------------------------------------- 2.02 - August 2022 - AMD Ryzen 9 7950X, Ryzen 9 7900X, Ryzen 7 7700X, Ryzen 5 7600X. - AMD X670E/B650 chipsets. - AMD Radeon RX 6950 XT (Navi 21 KXTX), RX 6750 XT (Navi 22 KXT), RX 6650 XT (Navi 23 KXT) and RX 6400 (Navi 24 XL). - Preliminary support of AMD EXPO memory overclocking profiles. - Intel Z790 platform. - Intel Xeon Platinum, Gold and Silver "Ice Lake-SP" (10nm, FCLGA4189). -------------------------------------------------------------------------------------------------- 2.01 - April 2022 - Glenfly Arise-GT10C0 GPU. - Intel Core i9-12900T, Core i5-12600T (35W). - Intel Atom x6427FE, x6425RE, x6425E, x6414RE, x6413E, x6212RE, x6211E, x6200FE (Elkhart Lake, FCBGA1493). - Intel Pentium J6425, N6415 (Elkhart Lake, FCBGA1493). - Intel Celeron J6413, N6211 (Elkhart Lake, FCBGA1493). - Preliminary support for Intel ARC 3/5/7 (DG2). - Preliminary support for Intel Raptor Lake (13th gen). - AMD Ryzen 7 5700X, Ryzen 5 5600/5500. - AMD Ryzen 3 5300GE, Ryzen 3 PRO 5350GE, Ryzen 5 PRO 5650GE, Ryzen 7 PRO 5750GE (Cezanne). - AMD Ryzen 9 6980HX, 6900HX, Ryzen 7 6800H, Ryzen 5 6600H (45W). - AMD Ryzen 9 6980HS, 6900HS, Ryzen 7 6800HS, Ryzen 5 6600HS (35W). - AMD Ryzen 7 6800U, Ryzen 5 6600U (15-28W). - AMD Ryzen 7 5825U, Ryzen 5 5625U, Ryzen 3 5425U (15W). - AMD Rembrandt & Raphael APUs (RDNA2). - AMD Mendocino APU (Zen2 + RDNA2). - AMD Radeon RX 6850M XT GPU (NAVI22). - AMD RX 6800S, RX 6700S, RX 6650M, RX 6650M XT GPUs (NAVI23). - NVIDIA GeForce RTX 3090 Ti GPU (GA102-350, 450W). - Improved information accuracy when core isolation is enabled. - Improved validation process for high clock submissions (>6GHz). -------------------------------------------------------------------------------------------------- 2.00 - March 2022 - Intel Core i9 12900KS. - Intel Core i7-1280P/1270P/1260P, Core i5-1250P/1240P, Core i3-1220P (28W). - Intel Core i7-1265U/1255U, Core i5 1245U/1235U, Core i3 1215U (15W). - Intel Core i7-1260U/1250U, Core i5 1240U/1230U, Core i3 1210U (9W). - Intel Pentium 8505, Celeron 7305 (15W). - Intel Pentium 8500, Celeron 7300 (9W). - AMD Ryzen 7 5800X3D. - AMD Radeon RX 6500 XT. - Preliminary support of AMD Ryzen 6000 "Rembrandt" APUs. -------------------------------------------------------------------------------------------------- 1.99 - January 2022 - Intel Core i5 12500, 12400, Core i3 12300, 12100 CPUs. - Improved DDR5 SPD information report. - AMD CCD/CCX topology bug fix. -------------------------------------------------------------------------------------------------- 1.98.2 - November 2021 - Intel Core i7 12700H (1.98.2) - Improved validation process for Alder Lake records (1.98.2) - Improved support for AMD Cezanne 5600G/5700G APUs (1.98.2) - AMX instruction set support. - AMD 4700S processor. -------------------------------------------------------------------------------------------------- 1.97 - August 2021 - Intel Core i9 12900K, Core i7 12700K and Core i5 12600K "Alder Lake" CPUs and Intel Z6xx platform. - DDR5 memory SPD and XMP 3.0 support. - AMD Radeon 6600XT GPU. -------------------------------------------------------------------------------------------------- 1.96.1 - May 2021 - Intel Iris Xe GPU (DG1) (1.96.1). - Improved support of Centaur CHA processor (1.96.1). - Preliminary support of Intel Alder Lake and Z6xx platform. - Preliminary support of DDR5 memory. - AMD Ryzen 5700G, 5600G and 5300G APUs. - AMD Radeon RX 6900 XT, 6800 (& XT), 6700 XT GPUs. -------------------------------------------------------------------------------------------------- 1.95 - January 2021 - LPDDR4 and LPDDR4X memory SPD. - AMD Cezanne and Lucienne APUs. - AMD ThreadRipper PRO 3995WX, 3975WX, 3955WX, 3945WX and WRX80 chipset. - Intel Core 11th generation "Rocket Lake". - Mainboard PCI-Express generation report (Mainboard tab). - Graphics Interface Link current speed and max speed (Mainboard tab). - NVIDIA GPU base and boost clocks (Graphics tab). -------------------------------------------------------------------------------------------------- 1.94.8 - November 2020 - Intel Tiger Lake-U and Tiger Lake-H (1.94.8). - Intel Z590 (1.94.8). - NVIDIA RTX 3070 GPU (1.94.8). - AMD Ryzen 5000 Vermeer preliminary support. - Intel Rocket Lake preliminary support. - GPU TDP. -------------------------------------------------------------------------------------------------- 1.93 - August 2020 - AMD Ryzen 7 PRO 4750G, Ryzen 5 PRO 4650G, Ryzen 3 PRO 4350G. - Intel Tiger Lake platform. -------------------------------------------------------------------------------------------------- 1.92.2 - June 2020 - AMD Ryzen 9 3900XT, Ryzen 7 3800XT and Ryzen 5 3600XT (1.92.2). - AMD B550 chipset (1.92.2). - Hygon processors preliminary support (1.92.2). - Intel Z490/W480/B460 Comet Lake platform support. - AMD "Renoir" Ryzen APU. - AMD Ryzen 3 3100 & 3300X. - Windows 10 on ARM processor preliminary support. -------------------------------------------------------------------------------------------------- 1.91 - December 2019 - AMD Ryzen Threadripper 3960X, 3970X and 3990X. - Intel Core 10xxx Comet Lake processors. - Centaur Haul CHA w/ AI hardware preliminary support. -------------------------------------------------------------------------------------------------- 1.90 - August 2019 - AMD Ryzen 3000 PRO (1.90.1). - Intel Comet Lake preliminary support (1.90.1). - AMD Ryzen Threadripper 3000 preliminary support. - Intel Ice-Lake preliminary support. - NVIDIA RTX 2070 and 2080 Super. -------------------------------------------------------------------------------------------------- 1.89 - June 2019 - Preliminary support of AMD Ryzen 3000 (1.89.1) - Intel Cascade Lake processors (1.89.1) - Zhaoxin ZX-5000 and ZX-6000 processors families support. - AMD APU Ryzen Picasso detection fix. -------------------------------------------------------------------------------------------------- 1.88 - March 2019 - Intel 9400F, 9600KF, 9700KF and 9900KF and 9th gen R0 stepping. - AMD APU Ryzen Picasso preliminary support. - DDR4 SDRAM chips manufacturer. - AMD Radeon VII (Vega 20). - NVIDIA GTX 1660 and 1660 Ti. -------------------------------------------------------------------------------------------------- 1.87 - November 2018 - Intel Basin Falls Skylake-X refresh. - NVIDIA GeForce RTX serie 20. - New AVX2 and AVX512 benchmarks (beta versions). -------------------------------------------------------------------------------------------------- 1.86 - August 2018 - Intel 9th generation Core family (Coffee Lake 9900K, 9700K, 9600K, 9600, 9500 and 9400). - Intel Coffee Lake-U processors. -------------------------------------------------------------------------------------------------- 1.85 - May 2018 - AMD AGESA version report in BIOS information. - Increased clocks refresh rate. - Fix initialization error on Windows XP and 7. -------------------------------------------------------------------------------------------------- 1.84 - March 2018 - Intel new Coffee Lake desktop and mobile processors. - New timers tool. - New "-bench" parameter. -------------------------------------------------------------------------------------------------- 1.83 - January 2018 - AMD desktop Raven Ridge APU (AM4). - Windows 10 Build 16299. -------------------------------------------------------------------------------------------------- 1.82 - December 2017 - AMD Raven Ridge processors support (1.82.1) - Intel Xeon Phi Knight Landing preliminary support. - Fix BCLK fluctuations on SKL-X. - The benchmark does now support systems with more than 64 CPUs. -------------------------------------------------------------------------------------------------- 1.81.1 - October 2017 - Intel Coffee Lake processors and Z370 platform. - Intel Skylake-X HCC processors. - Intel Xeon Skylake-SP and Xeon W Skylake processors. -------------------------------------------------------------------------------------------------- 1.80.2 - September 2017 - Intel Core X processors (KBL-X and SKL-X). - Preferred core(s) display in clocks dialog. - Fix 32-bit version issue with Windows 10 builds 16273 and 16275 (1.80.2) -------------------------------------------------------------------------------------------------- 1.79.1 - May 2017 - Intel X299 (1.79.1). - AMD ThreadRipper (1.79.1). - AMD Ryzen 5 and Ryzen 3. - Fix lockup at loading on Ryzen systems with RAID. - New benchmark version (17.01). -------------------------------------------------------------------------------------------------- 1.78.3 - February 2017 - AMD Ryzen (1.78.3) - Intel Kaby Lake processors. - AMD Embedded G and R-series processors. - DMP Vortex86 DX3. - Tons of bug fixes. -------------------------------------------------------------------------------------------------- 1.77 - August 2016 - New benchmark "submit and compare" feature. - New clocks dialog reporting all system's clock speeds in real-time. - Preliminary support for Intel Kaby Lake. - AMD Bristol Ridge processors. -------------------------------------------------------------------------------------------------- 1.76 - April 2016 - Intel Broadwell-E/EP processors. - AVX512 instruction set report. - Fixed several bugs (missing SPD on some systems). -------------------------------------------------------------------------------------------------- 1.75 - January 2016 - Intel Skylake Pentium and Celeron support. - Intel Broadwell-E preliminary support. - AMD A10-7890K APU. -------------------------------------------------------------------------------------------------- 1.74 - October 2015 - Improved CPU benchmark. - AMD Carrizo APUs. - eDRAM detection on Slylake CPUs. -------------------------------------------------------------------------------------------------- 1.73 - August 2015 - New validation. - eXtreme Overclock Mode with light CPU load. - New tab : CPU Benchmark. - Added L4 cache frequency (cache tab). - Added Windows 10 editions. -------------------------------------------------------------------------------------------------- 1.72.1 - May 2015 - Intel Skylake and Broadwell support (1.72.1) - Preliminary support for Intel Skylake. - Fixed support for Windows 10 build 9926. -------------------------------------------------------------------------------------------------- 1.71.1 - November 2014 - Intel Core M processors (1.71.1) - New CPU-Z logo (1.71.1) - AMD Athlon X2 450, Athlon X4 840 and Athlon X4 860K (Kaveri). - AMD FX-8370, FX-8370E, FX-8320E (Vishera). - Improved support for Intel X99 chipset. - Support for Microsoft Windows 10. -------------------------------------------------------------------------------------------------- 1.70 - July 2014 - Intel i7-5960X, i7-5930K, i7-5820K, i7-4790K, i5-4690K, Pentium G3258. - TSX instructions set support (including RTM and HLE subparts). -------------------------------------------------------------------------------------------------- 1.69.2 - April 2014 - Intel Haswell-E processors (1.69.2) - Preliminary support for DDR4 memory (1.69.2) - AMD FCH detection improved (1.69.2) - AMD A6-6420K, A4-6320, A4-4020. - AMD Athlon 5350 & 5150, Sempron 3850 & 2650 Kabini. - Intel Core i7-4770R and Core i5-4570R Crystal Well. - Added graphic card vendor. -------------------------------------------------------------------------------------------------- 1.68 - January 2014 - AMD Kaveri APUs (A10-7850K, A10-7800, A10-7700K, A8-7600, A6-7400K, A4-7300). - Intel i7-4790, i5-4690, i5-4590, i5-4460 (Haswell refresh). - Intel Celeron Haswell (G1830, G1820). - Intel serie 9 chipset (Z97). - Nuvoton NCT6106 and SMSC SCH5636 SIOs (Fujitsu mainboards). -------------------------------------------------------------------------------------------------- 1.67.1 - November 2013 - Fix several validations issues (1.67.1). - Improved support of Intel Silvermont (Bay Trail). - New validation. -------------------------------------------------------------------------------------------------- 1.66 - August 2013 - Intel Core i7-4xxx MQ/MX processors (1.66.1) - Fixed BCLK jump bug and validation issue (1.66.1) - Intel Xeon E5-2600 V2, Core i3-4xxx, Core i7-3910K processors. - Intel Atom Bay Trail-T preliminary support. - Intel Ivy Bridge-E/EP/EX support improved. - AMD Opteron 3200 and 3300 series. - ITE IT8603 and IT8623 SIOs (Asus FM2+ mainboards). - Microsoft Windows 8.1 (Windows Blue). - New version checker. -------------------------------------------------------------------------------------------------- 1.65 - June 2013 - AMD Opteron X1150 and X2150. - AMD FX-9590 and FX-9370. - Intel 4xxxHQ "Crystalwell" CPUs. - Intel Pentium "Haswell" G3430, G3420, G3220. -------------------------------------------------------------------------------------------------- 1.64 - April 2013 - Intel Atom Cloverview. - Intel Ivy Bridge-E/EP/EX. - AMD Richland APUs. -------------------------------------------------------------------------------------------------- 1.63 - February 2013 - Intel Pentium & Celeron "Ivy Bridge" CPUs. - AMD Athlon X4 750K. - FMA3 & 4 instructions sets. - Support for systems with more than 64 CPUs. - Report TDP in validation pages. -------------------------------------------------------------------------------------------------- 1.62 - October 2012 - AMD "Vishera" processors. - Intel Haswell & Ivy Bridge E/EP preliminary support. - Reduce CPU utilization. - Improved validation process. -------------------------------------------------------------------------------------------------- 1.61 - July 2012 - Fix wrong clock speed report (1.61.3). - Intel CedarTrail platform. - VIA VX11 chipset. - Intel Xeon E5 processors. - Fix wrong CPU clock speed under Win8. -------------------------------------------------------------------------------------------------- 1.60 - March 2012 - Intel Core i5 2550K, 2450P and 2380P with no GPU. - Intel Core i3/i5/i7 "Ivy Bridge" (37xx, 35xx, 34xx, 33xx, 32xx). - Intel Xeon E3 (SandyBridge-WS). - Intel Z77 platform. - AMD FX-8140, FX-4150. - AMD "Trinity" APU Preliminary support. - Windows 32/64-bit information. -------------------------------------------------------------------------------------------------- 1.59 - November 2011 - AMD Opteron Interlagos and Valencia (Bulldozer). - AMD SR56x0 I/O bridge and SP5100 southbridge (Maranello). - Intel Core i7-3960X, 3930K and 3820 (SandyBridge-E). - Intel X79 chipset (Jaketown). - VIA Nano 1000/2000/3000, Eden X2, Nano X2/X3, QuadCore. - Support for Windows 8. -------------------------------------------------------------------------------------------------- 1.58 - June 2011 - AMD FX "Bulldozer" processors family (K15). - AMD Llano processors family (K12). - Intel Sandy Bridge-EP processors preliminary support. -------------------------------------------------------------------------------------------------- 1.57 - February 2011 - Intel Xeon "Westmere-EX" support. - GPU frequency report on Intel Sandy Bridge processor. - AMD Zacate/Ontario processors support. - Report TDP on main page when available. - Cores clocks on floating menu. - P67/H67 stepping report. -------------------------------------------------------------------------------------------------- 1.56 - October 2010 - Intel Core i3/i5/i7 "2000" serie processors (Sandy Bridge) with new logos. - Intel Core i7 970 "Gulftown". - Intel P67 chipset. - AMD Phenom II, Athlon II and Sempron II "Caspian" processors. -------------------------------------------------------------------------------------------------- 1.55 - July 2010 - VIA VX900/VX900M and VN1000/VN1000M chipsets. - Intel Core i5-760, Core i7-875K and Core i5-655K processors. - Intel Core i7-940XM, 840QM, 740QM mobile processors. - Intel Core i5-450M, 540UM, 430UM, Core i3-370M mobile processors. - Intel Pentium P6000 processor. - New parameter in cpuz.ini : UseDisplayAPI -------------------------------------------------------------------------------------------------- 1.54 - March 2010 - Intel Core i7-880, Core i5-680, Core i3-550 processors. - Intel Xeon 5600 line (32nm) processors. - AMD Phenom II X6, Sempron II, Turion II, Turion II Ultra and Athlon II Mobile "Caspian" processors. - NVIDIA GeForce 320M chipset. - AMD 870/880G/890GX + SB800/SB850 chipset. - Introduction of validation rooms. -------------------------------------------------------------------------------------------------- 1.53 - December 2009 - Fix validation issue with AMD Phenom processors (1.53.1). - Preliminary support for Intel Pinetrail platform (1.53.1). - Intel Core i7 930 & 950, Core i7 980X "Gulftown", Xeon W3565. - Intel Mobile Core i7/i5/i3 "Arrendale" (LV and ULV). - Intel "Clarkdale" platform improved support. - AMD Phenom FX-5000, Athlon II X2/X3/X4, Athlon L110. - AMD AM3 socket detection improved. - VIA VX800 and VX855 chipsets support. - ATI Radeon 2100 and Radeon X1250 support. - DirectX 11 detection fix. - Hardware virtualization support now reported as instructions set. - New HTML report with less information. -------------------------------------------------------------------------------------------------- 1.52 - July 2009 - Fix Core i7 clock bug (1.52.2) - New design with "Graphics" tab. - NVIDIA nForce 980a chipset support. - Intel Core i5 and Core i3 processors. - Intel Atom Z530, Pentium DC E6300 (2.8GHz) and Core 2 Solo processors. - Intel P55 and US15W chipsets preliminary support. - AMD Phenom TWKR support. - AMD Phenom X2 "Callisto" and Athlon X2 "Regor" processors. - AMD Opteron 6-core "Istanbul" processor. - Improved support for Windows 7. - New Intel logos. MD5 checksum : please refer to http://www.cpuid.com/cpuz.php#history -------------------------------------------------------------------------------------------------- 1.51 - April 2009 - New version with installer. - NVIDIA ION platform. - Intel "Clarkdale" processor preliminary support. MD5 checksum : please refer to http://www.cpuid.com/cpuz.php#history -------------------------------------------------------------------------------------------------- 1.50 - February 2009 - Improved support for AMD Phenom II processor. - Support for NVIDIA 740i chipset. - Several bug fixes. MD5 cpuz.exe (1.50) : E1C827C54F527404EDDA6D65DA0280D8 -------------------------------------------------------------------------------------------------- 1.49 - December 2008 - AMD Phenom II processor. - New Intel Core 2 models. - Improved loading time. - New online validation process. MD5 cpuz.exe (1.49) : B836E86B40D7AFAF99D9C512E8CC9FEF -------------------------------------------------------------------------------------------------- 1.48 - October 2008 - Improved support for Intel Core i7 (Bloomfield & Gainestown). - Intel Atom dual-core version support. - AMD Athlon "Kuma" processor support. - Alternate clock computation method based on "duty cycles" for Intel Core 2 processors (see ShowDutyCycles in cpuz.ini) MD5 cpuz.exe (1.48) : DB78FBF1F99B7709240B495E59758CCE -------------------------------------------------------------------------------------------------- 1.47 - August 2008 - Intel Core i7 processor. - Intel Core 2 Duo S Mobile processors. - NVIDIA MCP79/7A chipset. - AMD 790GX / SB750 chipset. MD5 cpuz.exe (1.47) : A7484EFA3C32BC968C248CB1237FF493 -------------------------------------------------------------------------------------------------- 1.46 - June 2008 - AMD Puma platform (Turion & Turion Ultra "Griffin"); - AMD Black Edition processors. - Intel Xeon EX "Dunnington". MD5 cpuz.exe (1.46) : C47432C41EC26156128F7B8E09E884CF -------------------------------------------------------------------------------------------------- 1.45 - May 2008 - Intel Atom Z500/Z510/Z520/Z530/Z540 processors. - Intel Core 2 Duo E7x00 processor. - AMD 45 nm Phenom (Dened & Shanghai) processors. - Intel P45 chipset. MD5 cpuz.exe (1.45) : DD4E540C04297CF93DC721166C13446E -------------------------------------------------------------------------------------------------- 1.44.2 - Mars 2008 - NVIDIA 650i, 680i, 750a/780a, 750i, 780i, 790i chipsets (1.44.2) - Intel G35 chipset (1.44.2) - Updated support for VIA chipsets (1.44.2) - Support for the new validator (1.44.1) - Preliminary support for VIA Isaiah processor. - Support for all VIA Model D processors: VIA C7-M, VIA C7-D, VIA Eden, VIA Eden. - Memory timings on Intel 5400A/B MCH (Skulltrail). - Fix AMD Phenom detection issue on Windows Vista 64. MD5 (1.44.2) : 81FB48A6EC7355E8D0DD71ADC2157CF6 -------------------------------------------------------------------------------------------------- 1.43 - January 2008 - Intel Skulltrail platform support (Core 2 Extreme QX9775 + 5400B MCH). - Intel X48 chipset detection. - AMD Athlon 64-LE 1600 and 1620 support. - Fix detection issues on unlocked Phenom (ES/BE). -------------------------------------------------------------------------------------------------- 1.42 - November 2007 - Intel Wolfdale/Yorkfield/Penryn CPUs support. - AMD Phenom and Opteron Barcelona support improved. - Current core selection menu (right click on the CPU page). - Loading progress. -------------------------------------------------------------------------------------------------- 1.41 - September 2007 - New CPU voltage monitoring. - Intel Xeon Tigerton support. - Intel IA64 CPUs support (Itanium / Itanium2)(special thanks to Rami Radi and Ray Hinchliffe). - AMD K10 Phenom preliminary support. - NVIDIA MCP73 support. - Intel XMP profiles support. - Memory modules nominal voltage. -------------------------------------------------------------------------------------------------- 1.40.5 - July 2007 - NVIDIA nForce 560 chipset support. - Intel Dynamic FSB technology support. - Athlon 64 X2 BE & Sempron LE (TDP 45W). - SiS671/FX/DX/MX northbridge support. - SiS968 southbridge support. -------------------------------------------------------------------------------------------------- 1.40 - May 2007 - VIA P4M800CE chipset support. - Preliminary support for Intel Penryn CPUs family (45 nm). - Intel Core 2 Duo E6x20, Pentium E2140/2160 processors recognition. - Intel P35, G33, G31, Q35, Q33, X38 chipsets support. - Intel GL960/GM965/PM965 chipsets support. - AMD Athlon 64 "Lima" processor support. - AMD Geode LX processor support. - NVIDIA nForce 520 chipset support. - New parameter "-console" to generate output in a command prompt (Windows XP only). - New icon. -------------------------------------------------------------------------------------------------- 1.39 - February 2007 - Windows Vista 64 support. - VIA CX700/VX700 chipset. - Added Merom XE (X7900/X7800) - Added "PCI" and "MaxPCIBus" in the ini file to configure PCI scanning. - Added "-core" parameter to display the clock speed of the specified core. - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.38 - November 2006 - VIA P4M890 and P4M900 chipsets. - NVIDIA 650i and 680i chipset. - AMD Athlon 64 FX-7x processor. - Core 2 Duo E6850, E6750, E6650 processors. - socket 775 Xeon processor. - New parameters "-txt" and "-html" (see above). - Lot of bug fixes. -------------------------------------------------------------------------------------------------- 1.37 - October 2006 - Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support. - Changed SSE4 to SSSE3 (Supplemental SSE3). - Added VIA VT8237A southbridge. - New HTML report. - Several bug fixes. -------------------------------------------------------------------------------------------------- 1.36 - August 2006 - New processor information display. - Intel 5000X/P/Z/V SPD support. - Intel Pentium D 925 & 945. -------------------------------------------------------------------------------------------------- 1.35 - June 2006 - ATI RS350, RS400, RS480/RX480, RS482, RD580/RX580, RS600/RD600, RS690, RS700 chipsets support. - ATI SB600 southbridge support. - Intel P965 chipset support. - Engineering samples Core based CPUs report. - Windows Vista product line report. -------------------------------------------------------------------------------------------------- 1.34.1 - May 2006 - AMD socket AM2/S1/F (rev F.) CPUs support. - Enhanced Performance Profile (EPP) memory information report. - Added Trc (bank cycle time) in DDR2 SPD report. - Added Trc (bank cycle time) on i925, i945, i955, i975 chipsets. - FB-DIMM DDR2 SPD information report. - Core 2 Duo names and logos added. - Turion 64 X2 logo added. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.33.1 - April 2006 - Intel i965 chipset support added. - Fix SPD detection problem on SiS 964/965/966 southbridges. - ODC (Odd Divisor Correct) for Athlon64 rev E. -------------------------------------------------------------------------------------------------- 1.33 - April 2006 - Memory Command Rate timing added. - Improved support for Intel Conroe/Merom CPUs. - Celeron M 420/430 Yonah. - Xeon Dual core Dempsey. - VIA C7-M CPU detection added. - VIA PT880, PT880 Pro, K8T900 chipsets support. - nVidia nForce 550/560/570 (MCP55) chipset support. - VIA VT8251 southbridge support. - Fixed HyperTransport information misreports (in dump file). - Added K6-2 and K6-III logos. -------------------------------------------------------------------------------------------------- 1.32.1 - March 2006 - New Intel logos. - Added Pentium D 925, Pentium EE 965. - Several bugs fixed. -------------------------------------------------------------------------------------------------- 1.32 - February 2006 - Athlon FX-60 detection added. - Athlon64 new memory dividers. - Celeron 35x Cedar Mill, Pentium D 805. - Core Solo & Core Duo detection improved. - VIA C7 CPU detection added. - Intel i975X, i945GT chipsets support. - ATI RD580 chipset support. - ULi smbus support improved. - Fix smbus conflict with ClockGen. -------------------------------------------------------------------------------------------------- 1.31 - November 2005 - Improved support for ATI RS480/482 chipsets. - GeForce 6100/6150 (nForce 410/430) chipsets support. - Intel E7520 chipset support. - New CPUs support : AMD Opteron socket 939, Intel Pentium 4 Cedar Mill and Presler, Intel Xeon Paxville, Intel Pentium M Yonah SC & DC. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.30 - August 2005 - Latest Sempron and Turion support improved. - Intel Xeon Potomac, Pentium M 780 support. - Improved Windows version report. - Support for SMBus on latest SiS bridges (964, 965, 966) and ULi bridges. - Increased clocks refresh rate. - Several bug fixed. -------------------------------------------------------------------------------------------------- 1.29 - June 2005 - New PCI devices report. - Switch for VCore report in .ini file. - VCore report on some uGuru mainboards. - Improved clocks computation. - Improved support for latest AMD CPUs, Celeron D 3x1 (EM64T). - Improved support for SiS 649, 650 and 656 chipsets, Intel 915PM chipset. - Improved stability when several instances of CPU-Z are running in the same time. - Restored html report in ghost mode (see "Parameters" chapter above). -------------------------------------------------------------------------------------------------- 1.28.6 - March 2005 - Support for Athlon 64 X2 CPUs - Support for i955X chipset - Bunch of bugs -------------------------------------------------------------------------------------------------- 1.28 - March 2005 - Support for SiS chipsets improved : 648FX, 649, 655FX, 655TX, 656 - Support for nVidia nForce4 SLI Intel Edition - Support for Intel Pentium D, Pentium XE, AMD Turion, Opteron 252 - New F7 key to simplifiy the creation of the validation file -------------------------------------------------------------------------------------------------- 1.27 - February 2005 - Support for Intel Pentium 4 6xx CPUs. - New validation system. - Hundred of bug fixes. -------------------------------------------------------------------------------------------------- 1.26 - December 2004 - VCore display on Pentium M CPUs. - New CPU clock computation. - Improved support of Transmeta CPUs. - Several bugs fixed. -------------------------------------------------------------------------------------------------- 1.25 - November 2004 - nVidia nForce4 chipset support - Intel Pentium 4J support - New button to refresh memory timings - Several bugs fixed -------------------------------------------------------------------------------------------------- 1.24 - September 2004 - AMD Sempron support - New memory SPD page - PCI-Express graphic interface support - Configuration file - External cache latency tool - Restored html report - Fix several bugs -------------------------------------------------------------------------------------------------- 1.23 - June 2004 - Intel i915P/G, i925X chipsets support - Intel LGA775 CPUs support - Intel's CPU number display - New AMD Athlon 64 steppings - New report in one file -------------------------------------------------------------------------------------------------- 1.22 - April 2004 - New CPUs : Xeon Nocona, Celeron Prescott - DDR2 memory support - Clock mode when iconized -------------------------------------------------------------------------------------------------- 1.21 - January 2004 - one file package - Windows 64 support - new chipsets support - new CPU support : Celeron M, Pentium 4 "Prescott" -------------------------------------------------------------------------------------------------- 1.20a - October 2003 - memory frequency and ratio on nForce2 - KT600 support - W83627THF VRM mode - SPD read improvement - Fix some memory leaks (DMI) - Fix memory size report - Fix AGP side band status --------------------------------------------------------------------------------------------------